Liquid error (templates/page.pagefly.89e22fe6 line 45): product form must be given a product
Details & Features
OCEANUS compressor block
The integrated low-pressure lubrication with slow running gear pump increases the service life of all moving parts of the compressor block.
Precisely the right amount of oil is fed into the compressor stages. Furthermore, the very easily accessible oil filler neck with oil dipstick make it easy to check the oil level.
Plateau-honed cylinders along with wear-resistant piston rings in the final stage minimise running costs. The compressor is capable of operation even at oblique angles of up to 30° (up to 20° in the petrol version)..
P 21 filter system
When used in conjunction with original BAUER filter cartridges, the P 21 filter system with integrated oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 140 m³ of air can be treated.
¹ If the units are maintained and installed correctly as described in the operating instructions or user manual and if the concentration of CO2 in the intake air does not exceed the values specified in the applicable standard for breathing air..
B-TIMER filter cartridge monitoring
The operating hours and the current level of cartridge saturation are displayed on the unique B-TIMER mini-computer. The B-TIMER flashes when a cartridge change is due. At the same time, the purchase order of the filter cartridge required is shown on the display. This ensures that the very best use is made of the filter's capacity at all times..
Stainless steel base frame and carrying handle
The stainless steel design provides the best possible protection against corrosion for applications in tropical regions or at sea..
Filling device
The filling device comprises a flexible "UNIMAM" high-pressure filling hose and filling valve complete with final pressure gauge. The final pressure gauge makes it easy to read off the filling pressure. It is protected against damage by a durable rubber jacket..
Filling hose
High-quality UNIMAM high-pressure filling hoses made from food-safe and long-life hose material make for flexible and safe handling. Swivel hose connections enable the filling valve to be connected to the breathing air cylinder quickly, easily and safely.
GS mark
The well-known GS mark which comes as standard with the JUNIOR II certifies that the compressor has been tested for safety and meets the exacting requirements of the German Equipment and Product Safety Act. Conformity and compliance with all DIN standards is assured.